I sat everything on Occurrences to 0%, and Operational Irregularities to around 40%.

Here I sat Locomotive Partial Power loss to 15, Locmomotive Full Power Loss to 7, and everything else to 5-6.

I sat Infrastructure Irregularities to around 40%, and everything to 5.

I started the simulation 9:57 in the morning.

Around 10:28 a train calls me telling me he lost catenary power, or that there were no juice on the catenary. I answered him calmly: "Train x stopped on track y due to missing power on the catenary. Please be patient. Power will return as soon as possible. Proceed when power returns."

I thought it would take a few minutes before it went back to normal. More and more trains started reporting electric failure.

Both trains coming from Mannheim and trains coming from Walldorf reportes these problem.

The problems started at around 10:28. Now the time is 11:02, and nothing have happened yet. What's wrong? How do I fix this failure? Do I have to fix it manually? Do I have to call someone to fix it? Or is it a bug?

I really hope someone here can answer me.

Thank you.

while i was opening simulation there is a message....neighbour data not found and after, when i klick on setting there is an error message.

Thanks for reply

Diego

good night

Diego

this happen with tracks 7, 8 that seems different from others tracks (i.e track 1 2 3 and 4)

thanks for reply

Diego.

Diego

Train 3403 arrived at Platform 2 from Kirchheim. I revoked the overlap but was unable to set a shunt route to the Bbf. I received a message at the bottom of the screen stating "P002 -> 240 Startsignal in use already". tried everything I could think of to determine what could be causing the problem but without success.

I restarted the sim from 0700, and was able to set a route from Platform 2 to Bbf (240) for another train (sorry, I didn't note the number) without any trouble. Then when train 7206 arrived at Platform 8 from Kirchheim I revoked the overlap but when I tried to set a shunt route from Signal P008 Sperrsignals 135, 207 and 240 all flashed yellow, and when I pressed any of those exit buttons I received the "P008 -> 135/207/240 Startsignal in use already" message.

I cannot think what could be causing this to happen, so any help would be much appreciated.

Regards,

Phil.

Is there someone that can tell to me the exact spawn exit point for this :

Heidelberg Bbf track 240, 241, 242, 133 and 134

Heidelberg Rbf track 756, 766 535 and 536

Heidelberg Rbf 860 (towards Karlstor)

thanks in advance

Diego