When a train to Celle on Gleis 3 has to wait for some time (it seems people find this a convenient place to have a heart attack), how could I divert the train behind via Gleis 4? 

I had tried just sending it through 4 but it just went right past - I just can’t figure out how to amend the timetable or tell the driver. 

Please advise,

Thanks

I have this one (Kleinstadt) and also bought many other ones. But after read the manual still persist many questions and sadly all youtube videos are in german language that i not understand.

Exist someone that could on discord screensharing with me tutorial this simulator to teach how to use this simulator?

I really appreciate any help.

IMHO if Signalsoft could have english good tutorials in english on youtube, maybe it could help in sales. I already bought some titles and if i know how to use them, for sure buy more.

Thank You!!!

With best regards

I have some small problems, the train ICE913 is on platform 1 and I want it to leave the station to the left side.

However I found the route in front of the train is very weird, I tried to set the route from P1 to 16 and it partly worked. At the same time the board is showing that there's a train occupying the route around 101, but I'm sure no train there. I asked the workers to check and repair everything. In addition, I tried many different ways to cancel the route but no one was successful. So I'm very confused now, is it a bug in this software, or did I not use the right method to solve this problem? 

And the ICE train does not show its number in the station, I don't know why it happens, it is related to the first problem.

Thanks in advance.

at the top it says "timtable loading error."

it returns to the main menu then freezes when attempting to exit program. only way I can get out of it is to kill it through task manager.



any help would be greatly appreciated.

thanks

Paul

I ask to signal soft team, before to introduce new simulations (with all problems well known and explained from Richard about his work in these months) if it will be possible to introduce new solutions in occourences also for all rheingold simulation, if possible starting from Brohl and Andernach

thanks for reply and sorry for bad english

Diego

Happy Sunday

Diego

Diego

Diego

pga

good sunday

Diego

Is there a way to offer this train and not get a penalty? Should I not offer the train? It says it is going to CE?

Thank you,

Steve Davis

Coweta OK

Thanks for reply

Diego

Train number 7701 goes to track 2, and then on to Dortheim. The driver never complains about being sent the wrong way. Is this normal, or am I missing something essential?

The second thing I'd like to know is what the blue glow is around the signals on the mainline, and around the group buttons on the panel.

Thanks in advance.

I'm new to train dispatching and I'm wondering if there is some instruction videos with different examples and situations or some tutorials. The wiki and manual are very helpful but it's always easier to learn through video tutorials. I had for example a problem when i chosen a route for a train that had some malfunction and stayed on the platform. I had another train incoming so i wanted to route that train but i could not because the routes were overlapping. I tried to reset the route for the malfunctioning train (because it was still standing and repairing) but i could not. I could not find the solution in the manual and I'm not saying it's not there but the language and explanations in the manual are hard for a newbie like me to understand.

Thank You in advance

See page 6

Good Night

Diego

I have only a question

I create a personal timetable (spawning locations are spawn_erle_X and spawn_dortheim_Y and spawn_celle_0 and this is ok but I have a problem in timetablestops

the string i write is :

Kleinstadt,1,1,--:--,02:18,0 for a train passing in track 1

Kleinstadt,2,2,--:--,03:51,0 " " 2

but in train overview if i want to see the timetable stop (option view timetable) there are no data in the window. Why this ?

and in Ks_track and Ks_nicetrack what i must indicate ?

thanks for the reply

Diego

My first problem is I can't seem to be able to move 087722 to GL14 from GL4 as requested.

Am I missing a simple move!!

Thanks to whoever can help

Ciao

Diego

Ciao

Diego

I purchased the Vol.3 yesterday (software version 2.0.0.33) and started with the "Kleinstadt" sim.

First of all, congratulations for this sim, it is very near to reality.

Knowing the Sp Dr S60 type quite well, I have encountered the following issues so far (these are also suggestions for improving the sim):

1. the switching signal "3" is obsolete because the main signal P1 (and also all P and N main signals) has its functions incorporated (signal type Hp00).

It is very uncommon that a switching signal is directly after a main signal Hp00 without a track switch in between. E.g. in case track 1 is occupied and an engine switching should

drive before Lsp3 but not into track 1 the switch engine would not stop before the switching signal Lsp3 and between it and P1 because it gets no signal where to stop.

Although the signal type Hp00 has officially been disestablished and set equal to Hp0/Ks0 type, they still exist and are in valid function (even in this sim which plays in 1974).

2. I tried to change over the engine on train 7734 and others from west to east. You can switch only over the signal Lsp2 via track 1, 2 or 3 and then to a position behind the

Lsp's 11, 12R2 or 9. The engine has to come back with a shunt route (of course, because it is not possible to set a train route into an occupied track).

So far in all cases it was not possible for me to get the engine back to track 4 where the waggons were. Several times the engine drove past the ESig F or FF and I could not get it back

even with the order to drive past the red light on the ESig.

When giving the order, the engine replies that the order has been understood and accepted. However it does not start moving at all.

In order to change this, because this is unreal, please be advised of the following: when switching an engine to a switching signal that is after an ESig, the engine must never drive also

past the ESig. This is forbidden by the regulations! In Germany, there is a switching signal Ra10 between the switching signal and the ESig which forbids to drive past the ESig in the

opposite direction, see here:

http://www.stellwerk...ch/ra.html#ra10

With this, it is not necessary to give an oder to drive past the red Esig. The shunt route for the engine is finished after the switching signal, not after the ESig !

This should be corrected for all SpDrS60 systems, it is no fun to sit and wait for the engine while the main line track is not available.

3. I did not manage to set train routes or switching routes from the Unterberg track to track 3 or 4 without pushing the "Fahrstrassenfreigabetaste" first. However, I have no problems

from the tracks of the main line to track 3 or 4 without it. Is this a bug or a "feature"?

Btw: I have never had a "Fahrstrassenfreigabetaste" so far on any SpDrS60 I know !?!

4. I did not manage to set a subsidiary signal function ("Ersatzsignal"). Theoretically you have to push the "ErsGT" button first and then the desired signal's button. How is that on this sim??

No offense meant, I just try to participate in the software improvement.

Dear Supporters, please let me know your comments on these issues.

thanks for your help

thanks