intallonabile Posted October 23, 2011 Posted October 23, 2011 Please, as i would to introduce in timetable some new freight trains is there someone that can tell me the lenght of Tracks in stations Remagen (6-7-151) and Sinzig (403+413+443 and 409) and Oberwinter (303 - 304) Thanks for the reply Diego
TjoeTjoe Posted October 23, 2011 Posted October 23, 2011 Please, as i would to introduce in timetable some new freight trains is there someone that can tell me the lenght of Tracks in stations Remagen (6-7-151) and Sinzig (403+413+443 and 409) and Oberwinter (303 - 304) Thanks for the reply Diego Standby, I will add this information to the SignalWiki in a few minutes time. Will publish it here : SignalWiki : Dispatching in Remagen Note: if you start the simulation with the -x option, you will get an extra menu option Developers, from which you can dump the Sim data. More information on that can be found in the SignalWiki - Command Line Options Erwin
Nopileos Posted October 23, 2011 Posted October 23, 2011 Hi Diego, a good question. Cause i have taken a Gag aside and the last railcar stand in the mainline. Not every track is practical to use the track for overhaul. Greets Nopileos
TjoeTjoe Posted October 23, 2011 Posted October 23, 2011 Allright, Wiki has been updated with respect to this subject, German and Dutch pages will follow soon Erwin
intallonabile Posted October 23, 2011 Author Posted October 23, 2011 Thanks Erwin you are always very very efficient I will send you some italians stellwerke photos as gift if you like this. Have a good sunday For Nopileos. In Italy when this happen there is another big problems because when i have a no main track with a train too long and the last part of train is on the main line and occupy a track circuit is not possible to open the signal in front of freight train because the stellwerke can not make a transit route on a secondary track and in this case is necessary a written order Ciao Diego
TjoeTjoe Posted October 23, 2011 Posted October 23, 2011 Thanks Erwin you are always very very efficient You're welcome. I will send you some italians stellwerke photos as gift if you like this. Of course I am interested. Erwin
intallonabile Posted October 23, 2011 Author Posted October 23, 2011 You're welcome. Of course I am interested. Erwin Erwin please confirm to me at your internet adress because because i have some problems to send photos Thanks Diego
intallonabile Posted October 23, 2011 Author Posted October 23, 2011 Erwin wrote ..... Note: if you start the simulation with the -x option, you will get an extra menu option Developers, from which you can dump the Sim data. Please can you give me more information to start with te -x option ? how can i make this ? Thanks Diego
TjoeTjoe Posted October 23, 2011 Posted October 23, 2011 Erwin wrote ..... Note: if you start the simulation with the -x option, you will get an extra menu option Developers, from which you can dump the Sim data. Please can you give me more information to start with te -x option ? how can i make this ? Thanks Diego Ciao Open the properties of your shortcut (right-click icon on the Desktop) for i.e. the KRE simulation. On the tab "Shortcut" there is an entry Target which should read something like: "D:\Program Files (x86)\Signalsoft\Remagen\Remagen.exe" Change that entry into : "D:\Program Files (x86)\Signalsoft\Bonn-Bad Godesberg\Remagen.exe" -x and you will have your Developper option next time you start the simulation Any other Command Line options available (See wiki) can be added the same way. Seperate them with a space. I'll see if I can add some more detailed explanation on this subject to the Wiki. Not on my to-do-list for today though BTW: Thanks for the photos Erwin
intallonabile Posted October 23, 2011 Author Posted October 23, 2011 Ciao Open the properties of your shortcut (right-click icon on the Desktop) for i.e. the KRE simulation. On the tab "Shortcut" there is an entry Target which should read something like: "D:\Program Files (x86)\Signalsoft\Remagen\Remagen.exe" Change that entry into : "D:\Program Files (x86)\Signalsoft\Bonn-Bad Godesberg\Remagen.exe" -x and you will have your Developper option next time you start the simulation Any other Command Line options available (See wiki) can be added the same way. Seperate them with a space. I'll see if I can add some more detailed explanation on this subject to the Wiki. Not on my to-do-list for today though BTW: Thanks for the photos Erwin Done ! Thanks Diego
Recommended Posts