Jump to content

Erlaubnis auf Gleis Dortheim - Kleinstadt


SpDrSimulant

Recommended Posts

Hallo,

hatte eben ein Mysterium: Die Gleisbautruppe bat um Sperrung des Gleises Kleinstadt-Dortheim (202). Gut, dann schicke ich die S-Bahn 19832 von Gl. 2 als Falschfahrt nach Dortheim auf Gl. 201. Aus Dh kommt laut Fahrplan in der nächsten Zeit nichts. Also Fdl Dh - den ich über die Sperrung Gl. Kleinstadt-Dorthaim informiert hatte - nochmal angerufen und ihn gefragt, ob er Zug 19832 annimmt. Den Zusatz in der Zugmeldung "auf dem linken Gleis" o.dgl. gibt's nicht. Seine Antwort "Was ist das für ein Zug?" war zwar etwas seltsam, aber die Ausfahrt N2 -> 201 konnte ich problemlos einstellen und mit Zs8 (FfGT+N2) ist die Bahn auch prompt abgefahren.

Eine Weile später müsste die nächste S-Bahn (Zug 19835) aus Dh kommen. Kommt aber nicht. Statt dessen ruft der Kollege aus Dh bei mir an und bittet um die Erlaubnis auf Gleis Dortheim-Kleinstadt. Einzige Antwort kann ja nur sein "Ich werde die Erlaubnis direkt wechseln". Aber wie? Es gibt hier kein Erlaubnis-Tischfeld. Also kann ich eigentlich gar nichts machen. Kollege ruft alle paar Minuten an, das selbe Spiel. Dann fordere ich ihn auf, alle Züge auf Gleis Dortheim-Kleinstadt anzubieten. Er bietet die S-Bahn an, ich nehme an und er ruft nach ein paar Minuten wieder an und fragt nach der Erlaubnis. Also so kommt die S-Bahn nie...

Mache ich was generell falsch oder hier stimmt was nicht?

Grüße,

Christian

Link to comment
Share on other sites

Du kannst noch nicht falschfahren. Das wird im Moment ueberarbeitet.

(Geht hauptsaechlich um Befehlausfertigung und Kommunikation).

Neues Befehlssystem ist gerade in der Mache...

Braunschweig Hbf hat erster Test durchgemacht. Noch ein Paar Aenderungen und dann klappt Stw Ba auch...

Kommunikation wird auch gerade was wichtiges an geaendert...

Updates kommen im neuen Jahr.

Link to comment
Share on other sites

Hallo,

danke für die schnelle Antwort und Erklärung. Alles klar - die Kollegen Schienenschrauber müssen beim nächsten Mal warten, bis es mir in den Fahrplan passt.

Ich bin gespannt auf die neue Version :-) Danke, Richard!

Grüße,

Christian

Link to comment
Share on other sites

Das schwierigste Problem in der ganzen Falschfahrerei und Befehlsausgaberei ist dass die Bahn es ueber die letzte 30 Jahre in der Wortlaut im Befehl/Kommunikation -zig mal geaendert hat....

Und wir sind am versuchen das abzufangen. Mit den Befehlen haben wir geloest. Mit der Kommunikation ist es was schwieriger...

Link to comment
Share on other sites

If possible i ask Richard in the next updat to remember to correct also the ein light of BU that for trains coming from Erle to Kleinstadt on right track doesnt light now.

Good evening

Diego

Link to comment
Share on other sites

  • 2 months later...

Posted 31 December 2011 - 20:25

If possible i ask Richard in the next updat to remember to correct also the ein light of BU that for trains coming from Erle to Kleinstadt on right track doesnt light now.

Good evening

Diego

Thanks as always

Diego

Edited by TjoeTjoe
Removed some strange code strings from your post
Link to comment
Share on other sites

  • 4 weeks later...

Another item to add at wish list :

1) (Old wish) light for the RRCrossing for train coming on right track from Erle

2) (new wish) the vorsignale for trains coming to the right track from Dortheim

thanks

Diego

Diego

Link to comment
Share on other sites

1, that's a tricky one. it's on the list though!

2. there are no distant signal indications on Sbk60 system :-) They're simply not shown on the panel

Link to comment
Share on other sites

Thanks to Richard for the reply.

Please, even if is not the correct section to post the question. Someone can tell me the difference in this two line block types :

"Zentralblock" and "Selbstblock"

thanks

Diego

Link to comment
Share on other sites

You can recognize the two different type as written here : SignalWiki - Signals - Automatic Block Signals

Zentralblock: signals are normally showing Stop aspect. When route is set, and conditions are met, signal will change to Proceed aspect

SB 60 (selbstblock) : showing Proceed aspect by default,except when the signal is covering a Level crossing, and of course when train is occupying the block behind the signal

Erwin

Link to comment
Share on other sites

  • 3 months later...

Please, i suggest to introduce a new request in bug list for kleinstadt

yesterday i notice that trains coming from CELLE lost their nunmber on gleis 4

Diego

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.