intallonabile Posted February 4, 2012 Posted February 4, 2012 working with this new simulation standing alone (not connected with others) for trains coming from Andernach will be in the next future possible to have the real representation of passenger scheduled stops at Andernach on Gleis 01 ? And if a train in Andernach arrive not in gleis 01 (for example it stops to give the way to another train more fast) what kind of representation i have after block section 37 and 39 ? i think that working not connected to Andernach all trains have passage on 37 + 39 + 01 without stops even if they have a stop for passenger service . Is this correct ? thanks for the reply Diego
signalsoftRC Posted February 5, 2012 Posted February 5, 2012 there is a severe technical difference between "being in line operations" and "stand alone'. In Line operations you will see the real mirror fields of the 37+39+1 and the pre-announcement on V001. The data is directly fed from Andernach simulation. Even if you set a route out of the yard towards 001, you will see the correct number first in V001 (blinking) If you're stand alone, we have two choices: 1 we leave those number fields dark and the train "suddenly" shows up at 001 without any "preannouncement" (the blinking number). Very "unreal". 2 we emulate the same "flow" of trains by actually letting the trains run over the 37-39-1 sequence and there is not much "difference' from being stand alone and being in line operations. We chose the 2. option. To keep the difference between "stand alone" and "line operations" as minimal as possible. That there is in stand alone not a "real platform" in 1, is a trade off. We do the same in Bad Breisig (the platform IS in both infrastructure files). In Weißenthurm this was not possible (as there are switches in between 1 and 001!)
intallonabile Posted February 5, 2012 Author Posted February 5, 2012 thanks as always Richard for your disponibility and fast reply to me have a good sunday Diego North W. Italy temperature - 16 !!!!
intallonabile Posted February 5, 2012 Author Posted February 5, 2012 Richard please . Where is the button switch indicator on/off ? i dont find it. ciao Diego
TjoeTjoe Posted February 5, 2012 Posted February 5, 2012 Richard please . Where is the button switch indicator on/off ? i dont find it. Yes, it is missing on the panel. For now, you can operate it from the Group Button Panel window Erwin
intallonabile Posted February 5, 2012 Author Posted February 5, 2012 OK i just do it ! Erwin, please can you inidcate to me where to find a timetable good for this simulation. I tried to download Project_Rheingold but no trains are on the panel good sunday Diego
TjoeTjoe Posted February 5, 2012 Posted February 5, 2012 I could be wrong, but I believe you also have Andernach, Bonn-Bad Godesberg, Remagen Those simulations have been updated this weekend as well, and those did also provide the latest timetable. A all the rheingold simulations (expect KK and KKAS) currently use one and the same timetable (Rheingold_project.mdb), it does no matter whether you use the KRE, KBBG, KAND etc version. They are all the same. So pick the latest from i.e. Andernach (included in 120203_project_rheingold.zip) I have no idea why the timetable is not offered within Weissenthurm to be honest. It might have been forgotten to do so Erwin
intallonabile Posted February 5, 2012 Author Posted February 5, 2012 ok is right I tried with new Project_Rheingold just used for Remagen and it works fine so for Weissenthurm. Thanks for the suggestion Diego
Nopileos Posted February 9, 2012 Posted February 9, 2012 Hi Diego, today i made some changes in the rheingold-timetable which has effects to Weißenthurm. In this overworked timetable with real stops will be a few overhaul, some RBs would be arrive at Track 3 and IC will pass them before depature. Think the new timetable will be online this night or tomorrow. Greets Nopileos
Wueht Posted February 10, 2012 Posted February 10, 2012 wieso sind denn neuerdings im unterforum deutsch englische sachen drin ?
TjoeTjoe Posted February 10, 2012 Posted February 10, 2012 Zuerst, das ist ganz kein Problem. Es gibt genug Moderators am Forum um zu beurteilen was Korrekt oder nicht ist . Aber wichtiger, es gibt (noch) kein English Unterforum für Weissenthurm. Also ganz verständlich das ein Post in English über Weissenthurm in dieses Unterforum gemacht ist
Wueht Posted February 10, 2012 Posted February 10, 2012 axo ok hab im englischen noch nich geschaut ob da weissenthurm ist. hab ja auch nur gefragt juckt ja auch nicht weiter das es hier ist.
signalsoftRC Posted February 10, 2012 Posted February 10, 2012 Teil ist mein Problem... ich lese 4 Sprachen durcheinander, ohne dass es mir überhaupt auffällt, das es eine andere Sprache ist. Ehrlich gesagt war es mir gar nicht aufgefallen dass es "English" war im Deutschen Forum....
Wueht Posted February 11, 2012 Posted February 11, 2012 naja im alter bekommt man so manche sachen nimmer mit :D
Nopileos Posted February 11, 2012 Posted February 11, 2012 Im englischen Bereich ist nicht viel los und man schaut selbst auch kaum bis gar nicht rein. Daher kann ich Diego sehr gut verstehen, dass er hier postet, damit es auch jemand merkt. Und bei unserem Denglisch fällt das doch gar nicht auf.
intallonabile Posted February 13, 2012 Author Posted February 13, 2012 ----------quote------------------------------------------------------------------ Hi Diego, today i made some changes in the rheingold-timetable which has effects to Weißenthurm. In this overworked timetable with real stops will be a few overhaul, some RBs would be arrive at Track 3 and IC will pass them before depature. Think the new timetable will be online this night or tomorrow. Greets Nopileos -------------------------------------------------------------end quote ---------------------------------------------------------------- If i well comprise this new timetable can work with simulation "stand alone " and train will have a regular stops standing on Andernach platforms with correct behaviour when are on block section on weissenthurm panel ? thanks for your reply Diego
TjoeTjoe Posted February 13, 2012 Posted February 13, 2012 If i well comprise this new timetable can work with simulation "stand alone " and train will have a regular stops standing on Andernach platforms with correct behaviour when are on block section on weissenthurm panel ? No, the changes in the timetable Nopileos is refering to are that some RB trains have their stop on Platform 3 in Weissenthurm now, as some IC's (and freight trains) overhaul them there. This has nothing to do with platform stops in Andernach and the pre-annoucement functionality when operating the simulation "stand alone". Richard has explained the severe technical complications pretty well in one of his previous posts above. This functionality has not changed, and will not change. The V001 window on the Weissenthurm will show the first train being spawned out of direction Andernach Erwin
intallonabile Posted February 13, 2012 Author Posted February 13, 2012 ok, i was bad understanding. Thanks Erwin Good Evening Diego
Recommended Posts