PrEZeX Posted February 23, 2012 Posted February 23, 2012 Hello again, I'm wondering if there is a way to run the simulation in full screen view (without the window borders and atop of the taskbar)? I also have a question regarding actual dispatching. I had a broken circuit on a track in Brohl simulation and because of that the signals before the track showed a red light. I've called a technician to fix the problem but I wanted to use the track. I've gave the train driver a written order to pass signal A1 and signal W1. I activated and secured level crossings and made sure that switch 1 was in the right position. The train driver passed the A1 signal, stopped at W1 and called me because the signal W1 showed a red light. I issued again a written order for the driver to pass W1 and he accepted it but didn't move. I don't understand how i can solve this problem. Below is a picture of the track. Thank you in advance Lukas
TjoeTjoe Posted February 23, 2012 Posted February 23, 2012 Hi, the answer to your first question is no: the panel is always with the main window Then your second question/problem: Why did you actually issue a written order for passing W1? The main signal can not be set to Proceed due to the broken circuit on track 1. So to let the train pass this signal with a written order and manually closing the first two level crossing from the left you are doing well. This movement due to the Written order will be a drive on sight But why the same for W1. You can just set a shunt route from W1 into track 1. W1 is a shunt signal (just in case you did not know). So set a shunt route into track 1, with grey buttons. This action will set and lock the switch, close the railroad crossing behind it and so on. No written order needed. It will be a drive on sight movement as well, but that is applicable for any shunt movement. Erwin
PrEZeX Posted February 24, 2012 Author Posted February 24, 2012 Hi, IF someone want to run the simulation in full screen like this (without windows frames and taskbar): it's quite easy. You just need to download a program called "AutoHotKey" and make a script file. I have made a script file that can run this simulation in full screen (toggle on and off) so just PM me if you are interested and I send you the file with a short description. Lukas
Recommended Posts