intallonabile Posted March 11, 2012 Posted March 11, 2012 Please. I'm am in Line operation with Ko Lutzel. There is a problem from Ko Hbf. Trains starts from Ko Hbf but never arrives at Lutzel I had also some problems for train from Norh. Signals are opened but trains are stopped and ask me the way ? Good Sunday Diego
Holger Martin Posted March 11, 2012 Posted March 11, 2012 I have the same problem when KKOL is started in line operations. But also trains from Weissenthurm don't arrive if no one has connected Weissenthurm already. The blocks get occupied (track 33 from Koblenz and track 002 from Weissenthurm) but the trains never arrive. In the train overview these trains are marked as "moving". Holger
TjoeTjoe Posted March 11, 2012 Posted March 11, 2012 Please. I'm am in Line operation with Ko Lutzel. There is a problem from Ko Hbf. Trains starts from Ko Hbf but never arrives at Lutzel This doesn't sound good. I had a similar issue in an other simulation today. So sounds like a bug in LineOps I had also some problems for train from Norh. Signals are opened but trains are stopped and ask me the way ? Could you be more specific. Which train was it? Did it call you and tell that you are sending him into the wrong direction. If yes, what was the destination code he was heading for Erwin
intallonabile Posted March 11, 2012 Author Posted March 11, 2012 Ciao Erwin. Train from Ko HBF is EC 1-4 It semms stopped even if in train overview is written coming at full speed train with a signallins problem from north is 4-7363 (i start at 21:00) Lokfhurer said me signal 401 (Urmitz entrance) is closed but on panel signal is on as fleeting and route is set well. But in another case for the same train (train overview said train coming at maximum speed) but train seems stopped in track Weissenthurm-Urmitz. The strange thing is also that signal fleeting for train from Ko Lutzel dont works well. Entrance signal from Ko Hbf on track 33 (Signal F1) automatically open but signal S1 remain red even if train EC 1-4 is on track.
DarkRanger Posted March 11, 2012 Posted March 11, 2012 Same Problem today in my simulation, too. Trains From KKO and KWHU leaving the Nighbour-Signalbox-area and are normaly displayed. ( Not shown as stopped or something else ) But nothing happens futher on. I tried ZBF with the answer " I'm doing my normal duty " - I tried "Emergency Stop" and "Go on " nothing happens. All Trains from KNE are going without problems. All failures in the connected Mode only.
KobaiasoftSupport Posted March 11, 2012 Posted March 11, 2012 Thanks for the information, everyone. I'm currently investigating why this happens and how we can solve it. We apologize for any problems - thank you for being patient!
KobaiasoftSupport Posted March 11, 2012 Posted March 11, 2012 I've reproduced it in 3.0.1.5 (the current release) but I cannot reproduce it using the upcoming release. Look for a new version of KKOL later today.
KobaiasoftSupport Posted March 11, 2012 Posted March 11, 2012 Koblenz-Lützel 3.0.1.6 is now available. Trains getting stuck seems to be no longer a problem. Let me know if you continue to have problems. Thanks again to those who reported the issue
intallonabile Posted March 11, 2012 Author Posted March 11, 2012 thanks to you for the sunday job !!! Diego
TjoeTjoe Posted March 11, 2012 Posted March 11, 2012 Hi Diego, this sounds like its all good again. Can you confirm? Same question to DrakRanger or anyone else who has encountered this issue. Off course, many thanks to Charlie for the quick response on this Thanks Erwin
Holger Martin Posted March 11, 2012 Posted March 11, 2012 Yes I confirm, in the new release, this problem is solved (at least in my installation) Thanks very much for the quick reponse and fix !!! Holger
DarkRanger Posted March 12, 2012 Posted March 12, 2012 THX, everything is working fine. Sorry for your short weekend.
Recommended Posts