First problem at Heidelberg Hbf. Train 7263 just arrived on track 4. Overlap remain still after having destroyed it with DRGT button. Where is the problem ?

in number entry:

try this: 004, arrow button left or right (signal), END button on keyboard, then RETURN. and gone is your overlap.

OK it works

But why not with the appropriate emergency button and only with this strange method ?

and why auxiliary log printer doesnt write code 05 after having destroyed overlap ?

This method for a train arrived at track 8 from Kirchheim doesnt works for end signal P008 overlap route

The grey area on the panel is SpDrS59

Overlap to be revoked with DRGT+FRT + signal button.

If this does not work, use FHT + signal button.

Additionally, the exit signal still be locked for exit route setting.

In that case, you need to revoke the train route on the station track using FHt + signal button of the cover signal in the middle

Erwin

Ps : Will do english wiki page sometime later this week

Hallo Erwin. Please. can you reply at this question

https://www.youtube.com/watch?v=rrvqzaHQJLQ

it seems at me that Heidelberg Rbf doesnt exist at this time because arriving at Heidelberg Kirchheim station there are not freight tracks tracks from RBF. is ok ?

Pheraps heidelberg was at very little distance from Mannheim rbf and this is he reason to close his freight yard ?

good evening

Diego

DRGT+FRT : no solution

FHT + signal button is ok and auxiliary printer correctly write 05 code.

Thanks

Diego

the sim is set in 1996 and the tracks were there in that time... now only some remnants can be seen.

OK it works

But why not with the appropriate emergency button and only with this strange method ?

and why auxiliary log printer doesnt write code 05 after having destroyed overlap ?

I don't know what you're doing different... that's the problem... if I would understand that...

Differences SpDrS59 compared to SpDrS60, are described here:

SignalWiki - Differences SpDrS59

Richard. i have used the word.....strange.....because this method doesnt works for all overlaps to be destroyed

please, can you try in this case :

train arrived at track 8 from Kirchheim . On my PC doesnt works for end signal P008 overlap route

Good night

Diego