Jump to content

Fleeting doesn't work on S-Bahn Main Line


Recommended Posts

Posted

Hello!

I've had this problem for a while now. I've played from 00:00 (signalbox time) to 01:00 without any problems. Suddenly I got a phone from an angry train driver, telling me he has been standing at signal 173 for 8 minutes now. I set the route from 173 to 163, hoping it was just a one-off. Then he calls me again, telling me he's been waiting at signal 163 for 5 minutes.

BQjh6U9.png

AzacmXa.png

I have no idea what's wrong. I've tried to deactivate and activate the fleeting several times now, but it doesn't work. This have happened before, and then I had to restart the simulator. Now it happened again, and I don't really want to restart the simulator every hour.

Is there anything I'm doing wrong? Is there something I have forgot to do?

Posted

Try to start the simulation at 0:01 (or later). The sim can't realy deal with the time from 23:59 to 00:01..

Greetings,

DevonFrosch

Posted

Additionally, remember that for trains with steering number Zero, you will have to set many train routes yourself, as Auto Fleeting is not intended to be working for such train numbers

Posted

Hi Stigah,

in your case the statement of Tjoe Tjoe is the solution.

The trains 98850, 97750 and 98852 all should go to the Bbf (KKB). Therefore they have the steering number 0. In this case the auto fleeting will not work to avoid that the trains pass by at KK track 115.

The steering number 0 should alert you to pay attention with this train because you have to handle it off the routine. You have to set the route for those trains to track 115 and then wait for the time to enter the Bbf. (I remember there is also one train that goes from KK directly to KKHR track 122 and changes its direction there (not as usual at KKHRW)).

As one can see in your screen shot the trains 98850 and 97750 are already to far. Train 98852 is waiting for your setting the route to track 115.

With all other steering numbers you don't have to do anything (see train 97752).

Besides it is a good thing to follow Devon Frosch' advice and start the simulation at 00.01 or better 00.02 hrs.

Good luck for the next time.

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.