Shunt from GL4 to GL14

[Whitestation]

Hi to you as you may see I am new to Little Town..

My first problem is I can't seem to be able to move 087722 to GL14 from GL4 as requested.

Am I missing a simple move!!

Thanks to whoever can help

[signalsoftRC]

Hi Mick,

Can you describe what you tried?

If it is a shunt movement, use the grey buttons only. The signals will then show Proceed for Shunt (white diagonal line), the train will have the purple dot next to it when it moves.

[Whitestation]

Hi Mick,

Can you describe what you tried?

If it is a shunt movement, use the grey buttons only. The signals will then show Proceed for Shunt (white diagonal line), the train will have the purple dot next to it when it moves.

The driver has requested to move from GL4 to GL14 as the train has now been split.. The train now has a purple dot next it.. Although I am only clicking the two grey buttons nothing seems to be happening.. Although both show green like they would if a normal route was set.

[TjoeTjoe]

The driver has requested to move from GL4 to GL14 as the train has now been split.. The train now has a purple dot next it.. Although I am only clicking the two grey buttons nothing seems to be happening.. Although both show green like they would if a normal route was set.

Do the same with the two grey buttons, but prior to that, press the FfrT button on the Group Button Panel.

Tracks 14 and 24 don't have overhead wires, therefor you need the FfrT to set a route towards those tracks.

Erwin

[signalsoftRC]

Ah... yes... the FfrT should be pressed BEFORE the route is called. To confirm that the operator knows that it has no catenary.

(in all other sims, we have now a red message at the bottom that informs about such errors. Kleinstadt doesn't have that yet. There is an update outstanding, but not this week)

[Whitestation]

Thank you all for your help..

Problem solved!!