Due to a train problem in righy track (Freight train) on block section number 33 some minutes ago i send a Transregio Train to Andernach via the left track (from track 3 in Brohl) but train missed the scheduled stop at Namedy.

good night

Diego

also there is a behaviour that seem strange for trains when i keep them in gleis 9 (arriving from Remagen) with all signals opened. In Train Overview train reduce his speed when it is on track 1 in Brohl but immediately after switch 16 it seems to increase speed (in train overview is written ..max speed...) , pheraps not so realistic ? Please someone can tell his impressions ?

Good Night

Diego

I think "max speed" means the maximum allowed speed, and "full speed" is as fast as the train can go.

...but immediately after switch 16 it seems to increase speed (in train overview is written ..max speed...) , pheraps not so realistic ?

See SignalWiki - Train Overview Status Messages

Max Speed - Train is moving at maximum allowed speed.

OK Thanks for reply, now my question is :

i dont know DB netg Ag Rules but in Italy when there is a switch and track when trains wait more fast trains that go in advance (the example is Brohl in gleis 9) the trains that wait keep the reduced speed (in this case it seems 40 km/h for switch 16 in reversed position) from main entrance signal until it stops at signal at the end of the track 9 ,even if this track is very long as in Brohl (700m meters).

If this is also the DB rule i think that train behaviour in Brohl gleis 9 is strange

Thanks

Diego

with more precision

it seems that the head of the train when is arrive on gleis 9 allow it to proceed at more hihg speed (60 km/h i think) even if the train has in this moment his tail on switch 16, and, if i well comprise, switch 16 is good for 40 km/h and not 60 km/h

End

Someone can tell me wich is the speed allowed for reverse switchs for route to track 3 in Andernach and speed for other freight tracks ?

Thanks

Diego

we're busy with some coding stuff for VOIP (telephone for dispatcher to dispatcher calls). after that we will look at some data stuff.

OK